To restring a Dewalt weed eater, identify your model, prepare the weed eater, measure and cut the correct string length, and follow a step-by-step guide for restringing. Maintain and replace the string regularly for optimal performance.
Identifying Dewalt Weed Eater Models and String Types
Dewalt offers a range of weed eater models, each designed for specific needs and preferences. Their cordless line-up uses battery power, making them lightweight and easy to maneuver. Dewalt weed eaters typically use a 0.080-inch or 0.095-inch diameter string for efficient cutting.
“Dewalt weed eaters are available in cordless models, using either 0.080-inch or 0.095-inch diameter string.”
| Model | Power Source | String Diameter |
|---|---|---|
| DCST920P1 | 20V Battery | 0.080-inch |
| DCST990H1 | 40V Battery | 0.080-inch |
| DCST970X1 | 60V Battery | 0.095-inch |
Table: Examples of Dewalt Weed Eater Models and String Types
Preparing Your Dewalt Weed Eater for Restringing
Before restringing your Dewalt weed eater, take the following steps to ensure safety and efficiency:
- Turn off the weed eater and remove the battery to prevent accidental start-ups.
- Place the weed eater on a flat, stable surface, with the cutting head facing up.
- Clean the cutting head and remove any debris or old string remnants.
“Always remove the battery and clean the cutting head before restringing a Dewalt weed eater.”
Measuring and Cutting the Appropriate String Length
To restring your Dewalt weed eater, you’ll need the correct string diameter for your model (either 0.080-inch or 0.095-inch). Measure out a length of string appropriate for your weed eater; generally, this will be around 20-25 feet. Cut the string using a pair of scissors or wire cutters.
Step-by-Step Guide to Restringing a Dewalt Weed Eater
Follow these steps to restring your Dewalt weed eater:
- Locate the tabs on the sides of the trimmer head and press them inward to remove the spool cap.
- Take the spool out of the trimmer head and ensure it’s clean and free of debris.
- Fold the string in half, making a loop at the center. Locate the divider on the spool, and hook the loop into the notch.
- Wind the string tightly and evenly around the spool in the direction indicated by the arrows on the spool.
- Leave about 6 inches of string unwound on each side of the spool.
- Insert the ends of the string into the eyelets on the trimmer head.
- Align the spool with the trimmer head, making sure the eyelets and string line up.
- Press the spool cap back into place, securing the spool and string.
“Remove the spool cap, wind the string around the spool, and reassemble the trimmer head to restring your Dewalt weed eater.”
Tips for Properly Winding Dewalt Weed Eater String
Winding the string properly is crucial for the performance and efficiency of your Dewalt weed eater. Here are some tips to help you wind the string correctly:
- Wind the string tightly: Make sure the string is wound tightly around the spool to prevent it from unwinding or tangling during operation.
- Wind the string evenly: An even winding pattern ensures the string feeds consistently and prevents jamming.
- Follow the winding direction: Pay attention to the arrows on the spool indicating the correct winding direction.
- Avoid overlapping: Try to prevent the string from overlapping itself as this can cause the string to bind and malfunction.
- Use the correct string diameter: Always use the recommended string diameter for your specific Dewalt weed eater model.
“Wind the string tightly, evenly, and in the correct direction to ensure optimal performance of your Dewalt weed eater.”
Troubleshooting Common Dewalt Weed Eater Restringing Issues
Even when you follow the restringing steps carefully, you may still encounter issues with your Dewalt weed eater. Here are some common problems and their solutions:
- String not feeding: If the string isn’t feeding properly, check the winding pattern and ensure the string is wound evenly and in the correct direction.
- Trimmer head not rotating: If the trimmer head isn’t spinning, make sure the string isn’t tangled or overlapping on the spool.
- String breaking frequently: Check the string diameter and ensure you’re using the correct size for your model. Also, inspect the trimmer head for any damage that might be causing the string to break.
- Unable to remove spool cap: If you can’t remove the spool cap, try pressing the tabs more firmly or use a flathead screwdriver to gently pry the cap off.
Maintaining and Replacing String on Dewalt Weed Eaters
Proper maintenance is essential for the longevity and performance of your Dewalt weed eater. Here are some tips to help you maintain and replace the string:
- Inspect the string regularly: Check the string for wear and tear, and replace it when it becomes frayed or thin.
- Clean the trimmer head: After each use, clean the trimmer head of debris to prevent buildup and potential malfunctions.
- Lubricate the trimmer head: Follow the manufacturer’s recommendations for lubricating the trimmer head to reduce friction and wear.
- Store the weed eater properly: When not in use, store your weed eater in a cool, dry place, away from direct sunlight to prevent the string from becoming brittle.
Selecting the Right String for Your Dewalt Weed Eater
Choosing the right string for your Dewalt weed eater is essential for optimal performance. Consider the following factors when selecting a string:
- String diameter: Dewalt weed eaters typically use string with diameters between 0.065 and 0.095 inches. Check your user manual for the recommended diameter for your specific model.
- String material: Nylon or synthetic polymer strings are commonly used, as they are durable and provide good cutting performance.
- String shape: Round, square, twisted, or serrated strings are available. Round strings are versatile and suitable for most cutting tasks, while the other shapes provide more aggressive cutting for thicker vegetation.
- Brand compatibility: Use Dewalt-branded string or a compatible third-party string to ensure proper fit and performance.
“Choose the right diameter, material, shape, and brand compatibility to ensure the best performance from your Dewalt weed eater.”
Table: Choosing the Right String for Your Dewalt Weed Eater
| Factor | Considerations |
|---|---|
| String diameter | 0.065 – 0.095 inches (check user manual for specific recommendations) |
| String material | Nylon or synthetic polymer |
| String shape | Round, square, twisted, or serrated |
| Brand compatibility | Dewalt-branded string or compatible third-party string |
By following these guidelines and tips, you’ll be able to restring and maintain your Dewalt weed eater for optimal performance and a longer lifespan.
Key Takeaways
- Identify your Dewalt weed eater model and the correct string type for optimal performance.
- Properly prepare your Dewalt weed eater for restringing by cleaning the trimmer head and ensuring it’s in good condition.
- Measure and cut the appropriate length of string according to your weed eater’s specifications.
- Follow a step-by-step guide to restring your Dewalt weed eater, paying attention to winding direction and securing the string properly.
- Maintain and replace the string on your Dewalt weed eater regularly to ensure its longevity and optimal performance.
- Choose the right string diameter, material, shape, and brand compatibility for your Dewalt weed eater.
Conclusion
Restringing a Dewalt weed eater is a simple process when you follow the right steps and use the appropriate string for your specific model. Regular maintenance and proper string selection will ensure the best performance and longevity of your weed eater.
